home *** CD-ROM | disk | FTP | other *** search
/ Mac Magazin/MacEasy 30 / Mac Magazin and MacEasy Magazine CD - Issue 30.iso / updates / VektorWorks / Web Update to VW9.5.0 / Web Update to VW9.5.0.rsrc / TEXT_500_Default ReadMe.txt < prev    next >
Text File  |  2001-12-05  |  19KB  |  512 lines

  1.  
  2.  
  3. VectorWorks 9.5.0 Installation README Document
  4. =====================================================
  5.  
  6. Thank you for purchasing or downloading VectorWorks 9.5.0.
  7.  
  8. This document contains important information regarding the installation and
  9. use of VectorWorks 9.5.0. Please read this before you install. Please be
  10. especially careful to read the Installation section below.
  11.  
  12. IMPORTANT - If you are a MacOS X user and have a dongle protected version
  13. of VectorWorks, make sure you read the "Before You Install" section below.
  14.  
  15.  
  16.  
  17. Support for Industry Series Products
  18. -------------------------------------
  19.  
  20. All VectorWorks 9.5 installers will install VectorWorks Foundation, RenderWorks,
  21. VectorWorks ARCHITECT, VectorWorks LANDMARK, VectorWorks ARCHITECT with LANDMARK,
  22. or VectorWorks SPOTLIGHT. You will need to provide your serial number as proof
  23. of registration before the installation will take place.
  24.  
  25.  
  26. Before you install
  27. ------------------
  28.  
  29. For MacOS 8.6 and 9.x users:
  30.  
  31.     VectorWorks 9.5.0 requires CarbonLib 1.2.5 or higher, and we recommend
  32.     CarbonLib 1.4. Go to http://kbase.info.apple.com and search for CarbonLib.
  33.     Download and install according to Apple's instructions. The update installer
  34.     also relies on CarbonLib, so you must perform this step before running the
  35.     installer.You can examine your current CarbonLib in the Extensions folder of
  36.     your System Folder or find it in Apple System Profiler in your Apple menu.
  37.  
  38.  
  39. For MacOS X users:
  40.  
  41.     We require that you run with MacOS X 10.1 or higher.
  42.  
  43.  
  44. For users with dongle protected versions of VectorWorks:
  45.  
  46.     If you use a Macintosh version of VectorWorks protected by a dongle, you may
  47.     need to exchange your dongle if you want to run VectorWorks under MacOS X.
  48.     The only dongle which will work with MacOS X is a HASP4 USB dongle. You can
  49.     identify it by the label "HASP4" printed on the side of the dongle. If you
  50.     have an earlier "MacHASP" or any Microguard dongle, you will need to
  51.     transition to the HASP 4 USB dongle.
  52.  
  53.     Your VectorWorks distributor will be able to furnish you with the HASP 4 USB
  54.     dongle, and the MacHASP USB dongle exchange may incur a nominal handling
  55.     fee. ADB dongles may require a replacement fee. Please contact your local
  56.     reseller or distributor if you require a change in your dongle
  57.     configuration.
  58.  
  59.     The VectorWorks distributor list can be found on line at:
  60.     http://www.nemetschek.net/sales/International.html
  61.  
  62.     Once you have received your HASP4 USB dongle, you will be able to continue
  63.     using your existing VectorWorks 8.5.2 or VectorWorks 9.0.1 applications with
  64.     the new dongle.
  65.  
  66.  
  67. Minimum System Requirements
  68. ---------------------------
  69.  
  70. The following are minimum system requirements to run VectorWorks 9.5.0. In many cases
  71. we would recommend a significantly more capable machine than is described by these
  72. minimum requirements.
  73.  
  74.  
  75.  
  76. Macintosh                                          
  77.  
  78.     VectorWorks
  79.     ---------------------------------
  80.     PowerMac 604e or newer           
  81.     MacOS 8.6 or later               
  82.     MacOS X 10.1 or later
  83.     CarbonLib 1.2.5 or later
  84.     64MB                             
  85.     110MB                            
  86.     SVGA 8 bit minimum               
  87.     SVGA 16 bit minimum for OpenGL   
  88.  
  89.  
  90.     RenderWorks
  91.     ---------------------------------
  92.     192MB additional RAM             
  93.     40MB additional hard drive space 
  94.     SVGA 16 bit minimum              
  95.  
  96.  
  97.     ARCHITECT/LANDMARK/SPOTLIGHT
  98.     ---------------------------------
  99.     64MB additional RAM              
  100.     90MB additional hard drive space 
  101.     SVGA 16 bit minimum              
  102.  
  103.  
  104.  
  105. Windows
  106.  
  107.     VectorWorks
  108.     ---------------------------------
  109.     Pentium
  110.     Windows95/NT4 or later
  111.  
  112.  
  113.     64MB
  114.     110MB
  115.     SVGA 8 bit minimum
  116.     SVGA 16 bit minimum for OpenGL
  117.  
  118.  
  119.     RenderWorks
  120.     ---------------------------------
  121.     192MB additional RAM
  122.     40MB additional hard drive space
  123.     SVGA 16 bit minimum
  124.  
  125.  
  126.     ARCHITECT/LANDMARK/SPOTLIGHT
  127.     ---------------------------------
  128.     64MB additional RAM
  129.     90MB additional hard drive space
  130.     SVGA 16 bit minimum
  131.  
  132.  
  133.  
  134. Installation
  135. ------------
  136.  
  137.  
  138.  
  139. Installation using the Full Application Installer
  140. -------------------------------------------------
  141.  
  142. Read this section if you are installing from a CD.
  143.  
  144. Mac install
  145.  
  146.     On the Mac, the full application install process is as follows:
  147.  
  148.     You will be asked for serial numbers and you should enter the serial number
  149.     for your VectorWorks product and RenderWorks if you own it.
  150.  
  151.     You will then be presented with the software license and read me document.
  152.  
  153.     Next you will be presented with the main installer dialog where you should
  154.     specify the disk volume where you want version 9.5.0 installed.
  155.  
  156.     Finally, the installation will take place.
  157.  
  158.  
  159.  
  160. Windows install
  161.  
  162.     On Windows the full application install process is as follows:
  163.  
  164.     After you read this READ ME, you will be asked for serial numbers and you
  165.     should enter the serial number for your VectorWorks product and RenderWorks
  166.     if you own it.
  167.  
  168.     Next you will be asked to choose the 9.0.1 application you wish to update.
  169.     Please be careful to select a product to be updated on your local hard drive
  170.     which matches the serial number you entered or the installer will not proceed
  171.     with the update.
  172.  
  173.     Next you are asked to choose the location where you want the 9.5.0 version
  174.     installed.
  175.  
  176.     Finally, the installation will take place.
  177.  
  178.  
  179. Installation using the Update Installer
  180. ---------------------------------------
  181.  
  182. Read this section if you are installing using a downloaded update installer.
  183.  
  184. This VectorWorks installer requires you to have an existing English-language
  185. version 9.0.1 VectorWorks product installed, and it will install a 9.5.0  version
  186. of the same product to a new location. Dongle-protected versions are also
  187. supported by this installer. This installer will not work if you have VectorWorks
  188. version 9.0.0 or prior.
  189.  
  190. If you do not have 9.0.1 or are not sure that your update will work, please
  191. contact your dealer or distributor for more information. VectorWorks 8.5.2 and
  192. VectorWorks 9.0.0 customers should also contact their dealer or distributor for
  193. more information about how to obtain VectorWorks 9.0.1 products.
  194.  
  195. You will be asked for your serial number at the beginning of the install process.
  196. Provide the serial number of the VectorWorks product you are updating, The
  197. installer will attempt to get this number for you from your existing preferences
  198. file, but if you have multiple VectorWorks products installed, the serial number
  199. the installer uses as default may be for the wrong product. The following table
  200. will help you identify the appropriate serial number to use.
  201.  
  202.  
  203.     Serial Number Prefix         Product
  204.     ----------------------------------------------------
  205.             1900                 VectorWorks 9
  206.             4900                 RenderWorks 9
  207.             5900                 VW ARCHITECT 9
  208.             6900                 VW SPOTLIGHT 9
  209.             7900                 VW LANDMARK 9
  210.             9900                 VW ARCHITECT with LANDMARK 9
  211.  
  212. If you own RenderWorks, enter your RW serial number as well, and RenderWorks will
  213. be updated to 9.5.0 along with the base application.
  214.  
  215. The installation process will take a total of 15-60 minutes depending on the
  216. speed of your hard drive, the speed of your internet connection, and which
  217. product is being updated. Depending on the product you are updating, 20 to 40MB
  218. of data will be downloaded from our web site during the update process. If the
  219. connection is disrupted during the download process, re-start the installer and
  220. the download will resume from the place where it stopped.
  221.  
  222.  
  223. Mac Update
  224.     
  225.     On the Mac, the update install process is as follows:
  226.  
  227.     You will be asked for serial numbers and you should enter the serial number
  228.     for your VectorWorks product and RenderWorks if you own it.
  229.  
  230.     You are then presented with the read me document.
  231.  
  232.     Next you are presented with the main installer dialog where you should
  233.     specify the disk volume where you want version 9.5.0 installed.
  234.  
  235.     After downloading the necessary files to perform the update, you are asked
  236.     where the VectorWorks 9.0.1 application is which you are updating. Please be
  237.     careful to select a product to be updated on your local hard drive which
  238.     matches the serial number you entered or the installer will not proceed with
  239.     the update.
  240.  
  241.     Finally, your 9.0.1 is copied and updated to version 9.5.0. On some machines,
  242.     the file copy step may take nearly half of the update time and write a large
  243.     amount of information to the hard drive. Make sure you have as much free-
  244.     space available as the size of your current 9.0.1 install. Your original
  245.     9.0.1 is left untouched.
  246.  
  247.  
  248.  
  249. Windows Update
  250.  
  251.     On Windows the update install process is as follows:
  252.  
  253.     After you read this READ ME, you will be asked for serial numbers and you
  254.     should enter the serial number for your VectorWorks product and RenderWorks
  255.     if you own it.
  256.  
  257.     Next you are asked to choose the 9.0.1 application you wish to update. Please
  258.     be careful to select a product to be updated on your local hard drive which
  259.     matches the serial number you entered or the installer will not proceed with
  260.     the update.
  261.  
  262.     Then you are asked to choose the location where you want the 9.5.0 version
  263.     installed. Do not choose a location inside of your VectorWoeks 9.0.1
  264.     directory or the installation will fail.
  265.  
  266.     Finally, your 9.0.1 is copied and updated to version 9.5.0. On some machines,
  267.     the file copy step may take nearly half of the update time and write a large
  268.     amount of information to the hard drive. Make sure you have as much free-
  269.     space available as the size of your current 9.0.1 install. Your original
  270.     9.0.1 is left untouched.
  271.  
  272.  
  273. Installation Q & A
  274. ------------------
  275.  
  276. Can I install on MacOS X?
  277.  
  278.     The installer should work on all versions of MacOS supported by
  279.     VectorWorks - including MacOS X. We have experienced a problem with
  280.     the installer software we are using which causes the installer to crash
  281.     at the very end of the installation process if you are installing under
  282.     MacOS 10.1. The installation is successful despite the crash. As a
  283.     workaround, you can run the installer from MacOS 9, and the installed
  284.     application will be usable under MacOS X.
  285.  
  286. My preferences were reset when I installed under MacOS X. Why?
  287.     
  288.     MacOS 9.1 and MacOS X are separate operating systems even though they
  289.     are installed on the same physical machine. The MacOS 9 environment is
  290.     completely independent of the MacOS X environment, and they do not share
  291.     application preferences.
  292.  
  293. What if I'm using Architect, Landmark, or Spotlight?
  294.  
  295.     The VectorWorks 9.5.0 version of your product is installed into a new folder.
  296.     After you run this installer, you will still have your original 9.0.1 version
  297.     in it's original folder.  You can run this installer multiple times to
  298.     install multiple products.
  299.  
  300. Why is the installer asking for my password?
  301.  
  302.     On MacOS X, you may need to provide an administrator user and password to
  303.     give the installer authority to add VectorWorks to your system.
  304.  
  305. Why is the installer asking for my serial number?
  306.  
  307.     This installer supports our entire product line. It asks for your serial
  308.     number to enable the ability to install the product or products you own. Make
  309.     sure you provide a serial number which matches the product you are upgrading.
  310.  
  311. Do I need a new serial number?
  312.  
  313.     All existing VectorWorks 9 foundation product serial numbers will work with
  314.     VectorWorks 9.5.0.
  315.  
  316. Will my existing VectorWorks 9.0.x be overwritten?
  317.  
  318.     No. VectorWorks 9.5 installs in a separate directory.
  319.  
  320. Will my preferences be overwritten?
  321.     
  322.     VectorWorks 9.5 uses a separate preferences file from 9.0.x, so
  323.     you can use 9.5 with no fear of having your 9.0.1 environment
  324.     affected in any way whatsoever. All Industry Series products use separate
  325.     preferences files as well, so if you use multiple VectorWorks products on the same
  326.     machine, they will all maintain independent preferences.
  327.     
  328.  
  329.  
  330. Platform Issues
  331. ---------------
  332.  
  333. MacOS X
  334.  
  335.     VectorWorks 9.5 has been developed to run as a native MacOS X application.
  336.     While it is possible to run it in the classic emulation environment, we
  337.     recommend that you avoid this if possible. We find that the classic
  338.     environment has a number of hardware and software compatibility issues which
  339.     are not present in native MacOS X.
  340.  
  341.     We recommend that in your System Preferences in the General pane, you set:
  342.     
  343.         Turn off text smoothing for font sizes 8 and smaller.
  344.         
  345.     Otherwise, 9 point text in the VectorWorks user interface will display poorly.
  346.  
  347.     We do not support UFS formatted volumes. You must install onto an HFS
  348.     formatted volume.
  349.  
  350. Windows
  351.  
  352.     No significant changes were made for 9.5.0 in the Windows architecture or
  353.     operating system requirements.
  354.  
  355.  
  356.  
  357. Notes for Industry Series products
  358. ----------------------------------
  359.  
  360. Industry series products have a number of files which are often customized by the
  361. user. These files may have also been modified by Nemetschek as part of the 9.5.0
  362. version, in which case our changes will take precedence. The following are some
  363. of the issues you may need to be aware of when updating a customized VectorWorks
  364. Industry Series application.
  365.  
  366. ARCHITECT
  367.  
  368.     If you have edited the ID symbols in ID_Symbols.mcd, then move ID_Symbols.mcd
  369.     from [VectorWorks]\Plug-ins\Common\data to the Plug-ins\Common\data folder in
  370.     the new 950 folder. From the VW950 application, open the newly located
  371.     ID_Symbols.mcd file and run the Output_ID_Prefs script in the pally document
  372.     palette to update the ID_Prefs.txt file.
  373.  
  374.     If you have edited preference set information (Door Hardware Library, Room
  375.     Finish Library, record and/or schedule definitions in VA Records and
  376.     Schedules, Wall Type Library, etc.), you have two options. You can leave your
  377.     preference sets where they are, and reestablish the preference set
  378.     selections, pointing to the existing locations. Or you can copy your existing
  379.     preference sets into your new 950 folder. No conversion will be necessary to
  380.     use 900/901 preference sets in 950, and 900/901 users can share preference
  381.     sets with 950 users.
  382.  
  383.     If you have modified the Task Manager database, copy [VectorWorks]\Plug-
  384.     ins\VW_Arch\Data\VA2 Task Data.txt to [VectorWorks]\Plug-ins\Common\data, and
  385.     rename it Task Data.txt.
  386.  
  387.     If you customized your workspace(s), textures, Notes Manager database(s), or
  388.     Object Libraries, you can copy these into your new 950 folder.
  389.  
  390.  
  391. LANDMARK
  392.  
  393.  
  394.     If you have edited the plant symbols in VL_Resources.mcd, then move
  395.     VL_Resources.mcd from 901->Plug-ins->VL_Land->Data to the corresponding
  396.     location in the new 905 folder. From the VW905 application, open the newly
  397.     located VL_Resources.mcd file and run the Rebuild Plant Library.txt script in
  398.     the VL_Resources scripts document palette to update the plant library.
  399.  
  400.     If you have edited the plant descriptions your project plant list or plant
  401.     database files, then move them from the location in your 901 folder to the
  402.     corresponding location in the new 905 folder.From the VW905 application, run
  403.     the VL Plant Database... command and the VL Project Plant List command to
  404.     reset the pointer to your new project plant list and plant database files.
  405.  
  406.     If you have edited the ID symbols in ID_Symbols.mcd, then move ID_Symbols.mcd
  407.     from 901->Plug-ins->VL_Land->Data to the Plug-ins->Common->Data folder in the
  408.     new 905 folder. Please note that the default location of this file has
  409.     changed with this release. From the VW905 application, open the newly located
  410.     ID_Symbols.mcd file and run the Output_ID_Prefs script in the pally document
  411.     palette to update the ID_Prefs.txt file.
  412.  
  413. ARCHITECT with LANDMARK
  414.  
  415.     If you changed any files in the existing Architect with Landmark folder,
  416.     these can be copied to the new 950 folder. There were no filename or path
  417.     changes between 901 and 950.
  418.  
  419.  
  420.  
  421. Functionality changes
  422. ---------------------
  423.  
  424. We have made the following targeted functionality changes in 9.5.0 in response
  425. to user feedback:
  426.  
  427. The trim command is back by popular demand. It is assigned command-T / control-T. As
  428. a result, the Format Text dialog has been assigned command-shift-T / control-shift-T.
  429.  
  430.  
  431. Changes since 9.0.1
  432. -------------------
  433.  
  434. We are including a list of fixes since 9.0.1 in the release notes directory. This
  435. list is not necessarily comprehensive and has not been significantly edited, but
  436. serves as a guide to the types of improvements we have made during the 9.5.0
  437. development cycle.
  438.  
  439.  
  440. One area of focus for the 9.5.0 release has been to improve speed in areas where
  441. 9.0.1's performance was unacceptable. We have made many improvements to meet this
  442. goal. Some specific examples follow.
  443.  
  444. Selected performance improvements between 9.0.1 and 9.5.0b5:
  445.  
  446.  The Tape Measure Tool is no longer significantly slower than it was in 8.5.2.
  447.  
  448.  The Protractor Tool is no longer significantly slower than it was in 8.5.2.
  449.  
  450.  Creating objects with the Create dialog is no longer significantly slower than8.5.2.
  451.  
  452.  Creating a symbol and leaving an instance in place is 40% faster in 9.5.0 than it
  453.  was in 9.0.1.
  454.  
  455.  Exiting symbols, especially nested symbols, is 40% - 300% faster in 9.5.0 than it
  456.  was in 9.0.1.
  457.  
  458.  Creating or deleting hundreds of classes at once is many times faster in 9.5.0 than
  459.  it was in 9.0.1.
  460.  
  461.  Hidden Line Rendering is twice as fast or faster in 9.5.0 than it was in 9.0.1.
  462.  
  463.  Convert to Lines and Convert Copy to Lines are twice as fast or faster in 9.5.0 than
  464.  they were in 9.0.1.
  465.  
  466.  Switching Sheets, especially in files with many layers, is 100% - 300% faster 9.5.0
  467.  than in 9.0.1
  468.  
  469.  Drawing rotated text and dimensions is up to five times faster in 9.5.0 than it was
  470.  in 9.0.1
  471.  
  472.  Most VectorScripts will run significantly faster in 9.5 than they did in 9.0.1.
  473.  
  474.  Most plug-in objects will regenerate significantly faster in 9.5 than they did in
  475.  9.0.1.
  476.  
  477.  Exporting files to VectorWorks 8 is many times faster in 9.5 than it was in 9.0.1.
  478.  
  479.  Files that contain worksheets with criteria open many times faster in 9.5 than they
  480.  did in 9.0.1.
  481.  
  482.  Selecting, moving, and drawing polylines is much faster in 9.5 than it was in 9.0.1.
  483.  
  484.  Dragging complex extrudes is much faster in 9.5 than it was in 9.0.1.
  485.  
  486.  Drawing large text blocks on Windows is much faster in 9.5 than it is in 9.0.1.
  487.  
  488.  Windows Postscript printing is 2 to 8 times faster in 9.5 than it was in 8.5.2
  489.  (larger files will see more dramatic speedups).
  490.  
  491.  
  492.  
  493. Known Problems
  494. --------------
  495.  
  496. MicroSpot print drivers have been demonstrated to be incompatible with CarbonLib
  497. 1.4. They work correctly with CarbonLib 1.2.5. Please use CarbonLib 1.2.5 if you
  498. rely on MicroSpot print drivers.
  499.  
  500. The Carbon print architecture under MacOS 9 and MacOS X is significantly different
  501. that it was under prior Mac environments. This introduces new compatibility issues
  502. for non-Apple print drivers. Check with your printer vendor for their most current
  503. Carbon-compatible print drivers. Because most PostScript printers use Apple print
  504. drivers, they are immune to these considerations.
  505.  
  506. Running VectorWorks 9.5.0 in the classic compatibility mode under MacOS X is possible
  507. but not recommended. There are a number of problems with classic mode which do not
  508. affect native Carbon applications.
  509.  
  510.  
  511.  
  512.